Fitting And Connection; Presence Detection - Wieland gesis KNX P CO Bedienungsanleitung

2.1 Switching Mode
The lighting switches on in case of presence and insufficient brightness, and
off in case of absence or sufficient brightness
2.2 Constant Light Control Mode
In Constant Light Control mode, the brightness is constantly maintained
at th pre-set value. It can be started fully automatically or manually using the
push button or remote control. Manually switching off, dimming or changing
the settings stops control mode for the duration of the presence.

3. Fitting and connection

3.1 Presence detection

The ideal mounting height is 2.0 - 3.0m.
The detector sensitivity decreases as the mounting height increases. The
presence detector requires a clear line of sight for reliable detection of per-
sons. Office furniture, mobile partitions, plants, suspended lamps, etc. may
have a detrimental effect on presence detection (shading).
M'height
2,0m
2,5m
3,0m
3,5m
Downloaded from www.Manualslib.com
Seated persons
3,0m x 3,0m
4,0m x 4,0m
4,5m x 4,5m
---
manuals search engine
Walking persons
4,5m x 4,5m ± 0,5m
6,0m x 6,0m ± 0,5m
7,0m x 7,0m ± 1,0m
8,0m x 8,0m ± 1,0m
GB
23