Functions - BEAUTY ANGEL CVT 32 Gebrauchsanweisung

Operation
Function
1. Lamps
5. VibraShape
6. Body cooling
7. Volume
8. Audio system
AROMA
28/52
Downloaded from www.Manualslib.com
4.6
Button sequence
manuals search engine

Functions

Description
START/STOP
Switch lamps on/off during the
application (in combination with
VibraShape: See below)
Select VibraShape (the diode at
the top)
Tip the button once: Vibration

plate will be switched off
Hold the button: Vibration

plate and lamps will be
switched off
Program 1
Program 2
Program 3
Program 4
Control cooling, levels 1-5
Switch off cooling:
Switch on cooling
Internal:
Control volume, levels 0-15
External: MP3 player or
smartphone
Select channel -
MP3 player or
smartphone
Increase the fragrance intensity:
Turn in the direction of the arrow
Reduce the fragrance intensity:
Turn in the direction opposite to
the arrow
Information
If the lamps are switched off
during the application, the
application time continues to
run.
START/STOP also switches
off the lamps.
The diodes next to the sym-
bol illuminate according to
the level set.
and 1: only the diode
at the bottom illuminates;
2 and 3: the diodes in the
middle and at the bottom
illuminate;
4 and 5: all three diodes illu-
minate.
See page 30.
The diodes next to the sym-
bol illuminate according to
the level set.
0-4: only the diode at the
bottom illuminates;
5-9: the diodes in the middle
and at the bottom illuminate;
10-15: all three diodes illumi-
nate.