Navigation - BEAUTY ANGEL CVT 32 Gebrauchsanweisung

04/2014
Downloaded from www.Manualslib.com
4.5.1
The device is operated with the navigation ring.
The diodes of the available functions and the navigation ring are illuminated in
default mode after starting up the device. After selecting a function, the re-
spective diodes and the navigation ring flash for a few seconds. Settings can
be changed during this time.
Operation – Demonstration mode
–
The audio functions and VibraShape can be tested in demonstration mode.
You have 30 seconds in which to select the function.
1506529-00A
manuals search engine

Navigation

Switch on lamps:
Tip the button once.

Switch off lamps/interrupt application:
Hold the button.

Select device function (go to pictogram)
e.g. VOLUME
Select sub-function (if available)
Change setting
press until
Operation
Operating instructions – 27/52