Worktop cutout
dimensions
Installation procedure
70
• Cooking hobs can be installed into worktops that are 30 to 50
mm thick.
• The kitchen furniture element underneath the hob should not
be fi tted with a drawer. If the kitchen furniture element as a
horizontal partition wall, it should be installed no less than 60
millimeters from the lower surface of the worktop. The space
between the partition wall and the hob must be empty; no
objects should be placed into that gap.
• On the furniture back wall there should be a cutout with width of
at least 175 mm along the entire width of the furniture element.
1 - Fixing bracket
2 - Screw
3 - Hole
A - Thin worktops
B - Thick worktops