WIKA Typ PU-448 Betriebsanleitung Seite 14

6. Virtual COM ports of the PU-448
If you are using the WIKA_TT software:
9. Setting the COM port: Options → Interface Port
GB
10. This information is displayed
under the menu item "Interface"
and can also be selected there.
→ This completes the change!
If you are using the WIKA_T12 software:
9. Setting the COM port: Options → Interface Port
10. This information is displayed under
the menu item "Interface Port" and
can also be selected there.
→ This completes the change!
14 WIKA operating instructions programming unit PU-448