BIOS
9.3.12
SATA And RST Configuration
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Advanced
┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐
│ SATA And RST Configuration │Enable/Disable SATA Device. │
│ │ │
│ SATA Controller(s) [Enabled] │ │
│ SATA Mode Selection [Intel RST Premium] │ │
│ With Intel Optane │ │
│ System Acceleration] │ │
│ SATA Interrupt Selection [Msix] │ │
│ SATA Test Mode [Disabled] │ │
│ RAID Device ID [Client] │ │
│> Software Feature Mask Configuration │ │
│ Aggressive LPM Support [Disabled] │ │
│ │ │
│ Serial ATA Port 0 Empty │ │
│ Software Preserve Unknown │ │
│ Port 0 [Enabled] │ │
│ Hot Plug [Disabled] │ │
│ Configured as eSATA Hot Plug supported ├────────────────────────────────┤
│ External [Disabled] │><: Select Screen │
│ Spin Up Device [Disabled] │^v: Select Item │
│ SATA Device Type [Hard Disk Drive] │Enter: Select │
│ SATA Port 0 DevSlp [Disabled] │+/─: Change Opt. │
│ DITO Configuration [Disabled] │F1: General Help │
│ Serial ATA Port 1 Empty │F2: Previous Values │
│ Software Preserve Unknown │F3: Optimized Defaults │
│ Port 1 [Enabled] │F4: Save & Reset │
│ Hot Plug [Disabled] │ESC: Exit │
│ Configured as eSATA Hot Plug supported │ │
│ External [Disabled] │ │
│ Spin Up Device [Disabled] │ │
│ SATA Device Type [Hard Disk Drive] │ │
│ SATA Port 1 DevSlp [Disabled] │ │
│ DITO Configuration [Disabled] │ │
│ Serial ATA Port 2 Empty │ │
│ Software Preserve Unknown │ │
│ Port 2 [Enabled] │ │
│ Hot Plug [Disabled] │ │
│ Configured as eSATA Hot Plug supported │ │
│ External [Disabled] │ │
│ Spin Up Device [Disabled] │ │
│ SATA Device Type [Hard Disk Drive] │ │
│ SATA Port 2 DevSlp [Disabled] │ │
│ DITO Configuration [Disabled] │ │
└─────────────────────────────────────────────────────────────────┴────────────────────────────────┘
Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
56
Version: 1.0
Computerboard