Mounting Location - Siemens SITRANS LC300 Kurzanleitung

Mounting Location

Recommendations
• Easy access for programming the unit using the rotary switch and buttons.
• An environment suitable to the housing rating and materials of construction.
Precautions
• Keep unit out of path of falling material. Protect probe from falling material by installing a
• Consider material surface configuration when installing unit.
• Tensile load must not exceed probe or vessel rating. On cable units, do not exceed the
Note:
operation.
Wall Restriction
Sensors must be at least 50 mm (2") from the wall or tank bottom and must be 500 mm (20") apart.
.
A5E32268590
Downloaded from www.Manualslib.com
shield.
tensile strength of the cable at 1900 kg / 4188 lbs.
Buildup of material or condensation in the active shield area does not affect
50 mm
50 mm
(2") min
(2") min
SITRANS LC300 – QUICK START MANUAL
manuals search engine
Multiple Units
500 mm 
(20") min
500 mm (20") min
Page EN-5