Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Instructions; Electrical Connection - AEG TP4080TWC Benutzerinformation

Vorschau ausblenden Andere Handbücher für TP4080TWC:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

2. SAFETY INSTRUCTIONS

2.1 Installation
• Remove all the packaging.
• Do not install or use a damaged
• Follow the installation instruction
• Always take care when moving the
• Do not install or use the appliance
• The floor area where the appliance is
• Make sure that there is air circulation
• Always keep the appliance vertical
• The rear surface of the appliance
• When the appliance is in its
Downloaded from
www.Manualslib.com
Items such as foam rubber (latex foam), shower caps,
waterproof textiles, rubber backed articles and clothes
or pillows fitted with foam rubber pads should not be
dried in the tumble dryer.
Fabric softeners, or similar products, should only be
used as specified by the product manufacturer's
instructions.
Remove all objects from items that could be a source
of fire ignition such as lighters or matches.
WARNING: Never stop a tumble dryer before the end
of the drying cycle unless all items are quickly
removed and spread out so that the heat is
dissipated.
Before any maintenance operation, deactivate the
appliance and disconnect the mains plug from the
socket.
appliance.
supplied with the appliance.
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
where the temperature can be less
than 5°C or higher than 35°C.
to be installed must be flat, stable,
heat resistant and clean.
between the appliance and the floor.
when being moved.
must be put against the wall.
permanent position, check that it is
fully level with the aid of a spirit level.
If it is not, adjust the feet accordingly.
manuals search engine

2.2 Electrical connection

WARNING!
Risk of fire and electrical
shock.
• Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
• The appliance must be earthed.
• Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
• Always use a correctly installed
shockproof socket.
• Do not use multi-plug adapters and
extension cables.
• Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
• Do not touch the mains cable or the
mains plug with wet hands.
• This appliance complies with the
E.E.C. Directives.
ENGLISH
5

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis