Herunterladen Inhalt Inhalt Diese Seite drucken

Thermal Cut-Out - Silvercrest SKF 2800 A1 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für SKF 2800 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Downloaded from
www.Manualslib.com
RP87713 Friteuse LB1 Seite 67 Mittwoch, 10. April 2013 2:56 14
4. Press the unlock button 7 to release the lid.
The lid 4 will open.
Warning! When frying frozen
items, pay attention to Tip 2 (see
"10. Various tips" on page 70) to
prevent the fat spitting.
Caution! Please do
not
fill
the
frying
basket 14
over
the
"MAX" mark. Take note
of the food producer's
information
regarding
the optimal quantity for
frying. The items to be
fried must always be completely covered
with oil or fat.
5. Remove the frying basket 14 from the
deep-fat fryer and place the items to be
fried in it.
6. Carefully replace the frying basket 14 in
the fryer. But do not yet move down the
handle of the frying basket 1.
7. Close the lid 4.
You can see the frying process through
the viewing window 5 in the lid 4 at any
time.
8. Lower the frying basket 14 into the hot
oil by pushing down the unlock switch of
the basket 2 and then moving down the
handle 1 of the basket.
SKF 2800 A1
manuals search engine
7.2 Frying times
Food
Temp.
(approx.)
Prawns, peeled, frozen
130 °C
Chicken legs
150 °C
Chicken wings
150 °C
Chicken breast fillet
150 °C
Potato chips (fresh)
170 °C
Potato chips
as stated by
(frozen)
manufacturer
Pork schnitzel, breaded
150 °C
Fillet of fish (frozen)
190 °C
The times given in the above table are guide
values applicable to a quantity of 250-
300 g. Frying times may differ with other
quantities and depending on the type of
food.

7.3 Thermal cut-out

In the event of overheating, the deep-fat
fryer switches off automatically, e.g. if there
is no or insufficient oil or fat in the fryer. This
can also happen if there is solidified fat in
the fryer that is melted too quickly.
If the thermal cut-out switches off the
appliance, proceed as follows:
1. Let the oil or fat cool down.
2. Press
the
Reset
switch on the back
of
the
heating
element
using
a
pen. The appliance
is now ready for
frying again.
Time
(min.)
5-8
15-25
8-18
8-18
10-15
15-25
8-15
67

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ian 87713

Inhaltsverzeichnis