Alarm Event-Data Set-Function; History Mode - TFA Dostmann KlimaLogg Base Gebrauchsanweisung

Downloaded from www.Manualslib.com
ALARM EVENT DATA SET FUNCTION:
If
•
automatically creates a special Alarm Event data
set.
Like a normal data record, this data record
•
contains a snapshot of the temperature and
humidity values as well as the current time and
date.
Also the value that triggered the alarm is marked in
•
this Alarm Event data set.
The Alarm Event data sets are recorded in addition
•
to the normal data sets and are automatically listed
in the history of normal data sets.
The Alarm Event data records can be displayed in the history

HISTORY MODE:

You also have the option to read the data sets and the Alarm
Event data sets on the instrument itself.
Press HIST button in normal mode.
•
HIST appears in the display.
•
The memory indication is hidden.
•
The values of the latest data set as well as the time
•
and date when this data set was recorded will be
shown.
Use the button as follows to navigate in history mode:
„HIST " --------------------next / older record
„OK/MAX/MIN" -------- -previous / recent record
„ALM" ----------------------separation of the Alarm Event-
„SET" --------------------- Back to normal mode
manuals search engine
an alarm is triggered, your instrument
Note:
mode on the instrument separately.
data sets
29