First Installation - TFA Dostmann KlimaLogg Base Gebrauchsanweisung

Downloaded from www.Manualslib.com
- Additional production of "AlarmEvent" records in case of
alarm
- Table standing or wall mounting

FIRST INSTALLATION:

The instrument operates with three 1,5 V batteries Type Micro
AAA. For installation and replacement of the batteries, please
follow the steps below:
When the instrument is powered up, a short beep will sound
and all LCD segments will light up.
The instrument shows the current temperature and humidity
values. 00:00:00 and 01.01.10 are displayed in the time and
date area. The instrument counts up until the time and the date
are manually set.
The time has to be set after the first installation under "DEVICE
BASIC SETTINGS" POINT "TIME SETTING".
manuals search engine
1. Insert finger or other solid
object in the space at the
bottom center of the
battery compartment and
lift up to remove the
cover.
2. Insert the batteries, pay
attention to their correct
polarity.
3. Insert compartment cover
and close it.
21