TFA Dostmann KlimaLogg Base Gebrauchsanweisung Seite 28

Downloaded from www.Manualslib.com
If the alarm limit is not activated, the alarm on/off
•
symbol is displayed as inactive on the toolbar
(crossed out).
Press and hold + or - button in setting mode, you
•
will enter fast mode.
To enter normal mode again, press either ALM
•
button again or press for at least 20 seconds no
button.
Alarm function:
In the event of an alarm, the symbol ALARM
•
flashes above the date and the Hi or Lo symbol of
the corresponding value.
If the alarm sound is activated, the symbol (bell)
•
flashes and the acoustic alarm will sound for 2
minutes.
Press ALM button to stop the alarm sound.
•
The corresponding "Hi" or "Lo" symbol and ALARM
•
continue to flash until the corresponding value is
again within the alarm limit or the alarm limit is
deactivated in alarm setting mode.
If any alarm limit is activated "ALARM" is displayed
permanently in normal mode (in the time and date display
The alarm sound can be deactivated in the basic settings of the
manuals search engine
Note:
area).
instrument if desired.
28