TFA Dostmann KlimaLogg Base Gebrauchsanweisung Seite 24

Downloaded from www.Manualslib.com
If you press and hold the "+" or "-" button, you are quickly taken
through the possible settings (time and date settings).
LCD-contrast:
"LCD" appears on the display and the default „5" starts
flashing. With the + or - button you can select between 0
until 7 as the LCD contrast.
Alarm sound ON/OFF:
„SOUND" appears on the display and the default "ON"
starts flashing. With the + or - button you can deactivate
(OFF) or activate (ON) the alarm sound. If the alarm
sound is activated, the alarm symbol will appear (bell) in
the toolbar. If the alarm sound is deactivated, the alarm
symbol does not appear.
This setting is related to the alarm sound only. Alarms that have
been set continue to be registered. Also they are shown on the
display as well. Only the sound is activated or inactivated by
12/24-Hour format:
The default „24 h" starts flashing in the display. Also the
current time will be shown in the display. With the + or -
button you can select between 12 hr or 24 hr time format.
If you select the 12 hr time format, AM or PM appears in
the display additionally.
Temperature unit (°C/ °F):
Beside the current temperature the default „°C" starts
flashing in the display. With the + or - button you can
select between „°C" or „°F" as the temperature unit.
manuals search engine
Note:
this setting in case of an alarm.
24