TFA Dostmann KlimaLogg Base Gebrauchsanweisung Seite 25

Downloaded from www.Manualslib.com
Time setting:
The hour digits start flashing in the hour display. With the
+ or - button you can set the hours.
Press SET button again and set the minutes by the same
way.
Date setting:
The year digits start flashing in the year display. With the
+ or - button you can set the year.
Press SET button again and the month starts flashing.
With the + or - button you can set the month.
Press SET button again and the day starts flashing. With
the + or - button you can set the day.
Main reset (resetting back to factory settings):
"MAIN
"OK/MAX/MIN" button is now pressed and held for three
seconds, the instrument deletes all settings and recorded
data. The instrument is reset to factory settings. After the
"OK/MAX/MIN" button has been pressed and held for
three seconds, the progress of the reset is shown in % on
the memory display. The instrument automatically
restarts when the reset is complete.
Note that through the main reset also all recorded data will be
deleted. If necessary, please ensure that there is no relevant
data on the instrument that has not yet been retrieved.
If the device shows a malfunction, we recommend that you
firstly check the batteries and try a normal reboot of the unit. If
this does not help, we recommend that you do the main reset.
manuals search engine
RESET" appears on the display.
Note:
25
If the