Basic Settings - TFA Dostmann KlimaLogg Base Gebrauchsanweisung

Downloaded from www.Manualslib.com
OK/MAX/MIN
Plus
Minus
DEVICE BASIC SETTINGS:
In normal mode, press and hold the SET button for 3 seconds
to enter the manual setting mode for the following functions:
- LCD contrast
- Alarm sound ON/OFF
- 12/ 24 hour format
- Temperature unit (°C/ °F)
- Time setting
- Date setting
- Main reset
After you press and hold the SET button for three seconds, you
are automatically taken to the first setting option for basic
settings, the contrast setting. Pressing the SET button once
again takes you to the next setting option.
If no button is pressed for 20 seconds, the Klimalogg Base
automatically switches back to the normal view. You can return
to the normal view at any time by pressing the "HIST" or the
"ALM" button.
Changes at the setting-mode require no additional confirmation
and are automatically saved when you leave or go further to the
manuals search engine
call up the Max.Min. values and the
current dew point
Scroll up will change settings
Scroll down will change settings
Note:
next setting.
23