Software-Update; Automatic Update - T+A Caruso Bedienungsanleitung

Notes on Energy Saving
General information
The CARUSO satisfies the requirements of the latest directives concerning energy-saving measures (EuP
directive). The modern design of the mains power supply makes an important contribution to this.
The internal micro-processor constantly ensures that sub-assemblies which are not currently required
are automatically switched off.
The device also has an automatic shutdown function (Auto Power Down).
If no music signal and no operation is detected for more than 20, 30 or 60 minutes (depending on the set-
ting in the system menu), the CARUSO enters standby mode automatically.
In standby mode the power consumption depends on the still active functions of the CARUSO. Please refer
to the technical data for details.
In countries outside the EU, in which the EuP directive has no validity, the automatic power-down feature can
j
be disabled if necessary.
Software update
General information
Software updates keep your CARUSO up-to-date. They bring new optimisations like faster opearation and
new features which were not available at the time the device was produced.

Automatic update

If the device is connected to the Internet, the CARUSO checks whether a new software version is available
for the device after power-on. If an update is available, the Caruso starts the update automatically.
The progress of the update is shown on the display. Wait until the process is completely finished. This may
take a few minutes.
Only after switching on the device with the power switch on the rear panel or after switching on from deep-
j
sleep standby (no Alexa and no network active) a check for new software is performed.
Do not disconnect the device from the power supply during the update process!
71