System Menu - T+A Caruso Bedienungsanleitung

System menu

Display
brightness
Temporary
mode
Clock
brightness
Time in
standby mode
Sleep timer
Time
settings
System
settings
64
Here you can adjust the brightness of the display during normal operation to your per-
sonal preferences in several steps.
Here you can set whether the display should be switched on permanently or temporari-
ly.
If the temporary mode is activated, the display is only switched on during operation and
then automatically switched off again.
Here you can set the brightness of the clock display in standby mode.
Here you can switch on the time-of-day display for standby operation.
The device can turn itself off automatically after a time between 1 and 60 minutes. To
activate this function, move the slider to the desired time. Once the set time has been
reached, the Caruso automatically switches to standby mode.
The time of day can be set under this menu item. It is possible to set the time automati-
cally via a radio source, the network or manually.
Choose the time zone according to the time zone of your country.
Auto power off
The device has an automatic shutdown function (Auto Power Down). If no music signal
and no operation is detected for longer than the set time, the Caruso automatically
switches to standby mode.
To deactivate the Auto Power Down function, select the Off option.
Language
With this menu item the system language for the the device display is set. The language
of transmitted data, e.g. an Internet radio station, depends on the source device or radio
station and cannot be set on the Caruso.
Device name
Under this menu item you can give the Caruso an individual name. The device appears
under this name when connected to a home network.
Firmware MCU | Firmware BLUETOOTH | Firmware LIBRE
Under these menu items, the installed software versions are displayed.
System Reset
By calling up and confirming this menu item, all personal settings are deleted and the
factory settings are restored.