Add The Camera In The Same Network; Wifi Settings - Reolink RLC-511W Bedienungsanleitung

Set up the Camera on Reolink Client
(For PC)
Please download and install the Reolink Client software from our official
website:https://reolink.com/software-and-manual/.
• Add the Camera in the
Same Network
1. Connect your computer to the
same router which the camera is
connected to.
2. Launch Reolink Client. The camera
will automatically display in the
device list in LAN.
NOTICE:
If you've created the password for
your camera on Reolink App, please
click the button to enter the
correct password to log in.
5 English

• WiFi Settings

Click the "Device Settings" button, and go to Network -> Wi-Fi Settings.
1. Scan the SSID.
2. Double click the SSID which you choose. Enter the password.
3. Click "Wi-Fi Test" to test the password.
4. Wi-Fi Test
a) If the Wi-Fi test succeeds, please go to step 5.
b) If the Wi-Fi Test fails, please check your Wi-Fi password and the
network connection, and then try again.
5. Click "OK".
6. Remove the Ethernet cable and you can access the camera via Wi-Fi
on the computer now.
1
3
4
5
2
English 6