E
ASSEMBLY
SEAT
•
The seat is clipped to the basic frame with clamps.
A
B
B
If you wish to remove the seat, follow the reverse procedure.
L
BACK
•
When assembling the back, the pneumatic spring is connected to the rear frame with a safety pin (1).
A
Downloaded from
www.Manualslib.com
1
A
2
3
Lay the seat (1) at a slight angle to the curved clamp (2) in such a way that the clamp catches
beneath the rear cross tube on the basic frame (3).
Press the front of the seat (1) downwards so that the U-clamp (4) engageds on the front cross
tube of the basic frame (5).
The Velcro fastener (6) is used to attach the lower leg padding to the braces on the frame of
the legrest (7).
Ensure that no objects or body parts get caught between the seat and the frame!
Align the rear frame so that the retainer on the lower part of the back (2) and the mounting lug
of the pneumatic spring (3) are above one another.
manuals search engine
B
4
C
5
6
7
A
1
2
3
4
ALESIA
06/2009
1 = Seat
2 = Curved clamp
3 = Rear cross tube
4 = U-clamp
5 = Front cross tube
6 = Velcro fastener
7 = Legrest frame
B
4
1
2