Inspection; Care; Plastic Parts - Vermeiren Alesia Gebrauchsanweisung

APPROX. EVERY 6 MONTHS
•
Depending on the frequency of use check the following:

INSPECTION

Depending on the amount of use, in principle we recommend inspections every two years, but at least
before usage is resumed. The following checks, at least, must be performed and documented by
authorised persons:
•
•
•
•
•
•
•
•
•
•
•
The service must only be confirmed in the service plan when at least the above-mentioned aspects
have been checked. If your specialist dealer does not perform the required services, then contact the
manufacturer. We shall gladly refer you to authorised specialist dealers in your area.
The manufacturer is not liable for damage caused by lack of inspections or poor inspections.

CARE

Your wheelchair requires regular care to keep it in a pleasant condition. To do this, note the following:
l
COVERS
•
Clean the covers with a cloth moistened by hot water. You can remove stubborn dirt by washing with a
mild commercial detergent. Stains can be removed by using a sponge or a soft brush. Do not use
sharp brushes or any other pointed objects for cleaning.
L
l
l

PLASTIC PARTS

•
Clean all plastic parts with commercial plastic cleaners. Take note of any specific product information.
SURFACE LAYERS
•
The high quality of the surface layer guarantees optimal protection against corrosion. If the outer layer
has been damaged by scratches or otherwise, you can protect the area by applying varnish obtainable
from your specialist dealer. Occasional greasing of the movable parts will ensure that you enjoy your
wheelchair for a long time.
Downloaded from www.Manualslib.com
- Moving parts on the tipping mechanism (if there is one)
- The condition of the covers
- That the armrest adjustment, seat angling and back adjustment are working properly
- Cleanness
- General condition
- That the screws are tight
- That the steering castors / brakes are working properly
If the rotation resistance is too great, clean the bearings of the steering wheels. If this
is insufficient, kindly consult your dealer.
Check the frame parts for plastic deformation and reduced functioning.
Visual inspection of damage to the paintwork (danger of corrosion)
Visually check the covers for damage
Check the castors work properly (run freely, run straight, parking brakes)
Check that all screws and bolts are tight and well-seated
The greasing condition of metal joints of movable parts
Visually check all plastic parts for tears and brittle spots
Check the legrest works properly (locking, load, deformation, wear and tear caused by weight,
adjustment lever)
Check, including visually, that the pneumatic springs work (incl. the adjusting lever)
Completeness of the delivery condition
Instruction manual available?
Never use steam or pressure jets.
Do not use strong cleaning liquids like solvents, nor use hard brushes.
We do not accept liability for damage caused by the use of improper cleaning liquids.
Do not allow the covers to get too wet.
manuals search engine
13
E
ALESIA
06/2009