Adjusting The Back - Vermeiren Alesia Gebrauchsanweisung

E

ADJUSTING THE BACK

The patient or attendant can incline the back section backwards by up to 30°.
A
L
L
B
L
L
Downloaded from www.Manualslib.com
USE BY AN ATTENDANT
Pull the release clip beneath the handle towards the handle. While keeping the release lever
held, the back can be moved to the position you want by gripping the handle. To fix the back in
the position you want, let go of the release clamp beneath the handle.
Take care, when adjusting the back, that the wheelchair does not start moving if the brake is
not holding it in place.
The pneumatic spring is designed to take the patient's weight. Without a weight and if the
release lever is not pressed, the back will always shoot back to the furthest forward position.
USE BY THE PATIENT
Pull the release lever, on the left or right next to the armrest retainer, gently upwards. While
keeping the release lever held, the back can be moved to the position you want by - while you
are seated - gently pressing your weight backwards against the back section or by slightly
bending your back forwards you will move the back of the chair forwards. To fix the back in the
position you want, let go of the release lever beneath the handle.
Take care, when adjusting the back, that the wheelchair does not start moving if the brake is
not holding it in place.
The pneumatic spring is designed to take the patient's weight. Without a weight and if the
release lever is not pressed, the back will always shoot back to the furthest forward position.
manuals search engine
A
B
6
A
B
ALESIA
06/2009