Accessories; Document Holder (B79); Pads (L04) - Vermeiren Alesia Gebrauchsanweisung

ACCESSORIES

•

DOCUMENT HOLDER (B79)

•

PADS (L04)

The side pads can be folded away, and you can adjust their height, width and length. The pad
retainers can be mounted behind the back section. There are two screw joints in the rear frame to
attach the retainer bar.
L
Downloaded from www.Manualslib.com
A
C
D
Ensure that, after the adjustment, only padded parts are in contact with the body, or pressure
points can be created.
manuals search engine
A holder can be clipped to the back of the chair to store
documents while the patient is being moved. There are two
screwholders in the rear frame to attach this. Mount the rail
using the two screws supplied so that the open rail ends are
outwards. The holder is hung onto the rail ends.
L
The document holder is only designed to hold a
maximum of 4 kg.
MOUNTING
Insert the pad into the pad retainer behind the
back section in such a way that the head of the
adjustable screw (A) fits into the slot in the pad
retainer.
FOLDING AWAY
Raise the pad until the head of the adjustable
A
screw (A) comes out of the slot in the pad
retainer. Turn the pad outwards or inwards. In so
doing, the head of the adjustable screw (A) can
be guided to the edge of the pad retainer.
l
Avoid twisting the tube.
ADJUSTING THE HEIGHT
The sideways height of the pads is fixed by
B
changing the position of the adjusting screw (A)
on the vertical tube of the side pad.
ADJUSTING THE WIDTH
You set the width by loosening the screw (B). The
sprocket so released can be put into the position
you want.
ADJUSTING THE LENGTH
The length of the side pads is set by loosening the
screw (C) on the side pad's horizontal tube (3
positions). The screw is then re-tightened.
The pad automatically adjusts to your position on
the body side via axle (D).
9
E
ALESIA
06/2009