Inserting/Replacing The Battery; Switching Off - Zipper Maschinen ZI-LBR40V-AKKU Betriebsanleitung

Inserting/replacing the battery:

 Charging the battery as described in the user manual
of the charger.
 Press the charged battery into the power tool until it
clicks into place.
 To remove, press the release button (1.) and pull out
the battery (2.).
Switching on:
 First press the Start button, then press the ▲- button.
The blower unit will start at minimum speed.
 To increase the air speed, press the ▲- button
repeatedly until the desired step is reached (minimum
speed middle speed > high speed > maximum
>
speed/ Turbo).
The speed setting is displayed on the status LED.
NOTE: When operating at maximum speed/Turbo (red
LED lights) the blower unit automatically switches a step
down after 30 seconds to save battery capacity.
 To reduce the air speed, press the ▼- button
repeatedly until the desired step is reached (maximum
speed/Turbo > high speed > middle speed > minimum
speed).
The speed setting is displayed on the status LED.

Switching off:

 Press the Stop button.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-LBR40V-AKKU
OPERATION
27