Working With The Device; Reading The Hours; Symbols On The Display - Agreto VibroCounter II Benutzerhandbuch

AGRETO VibroCounter II

8 Working with the device

8.1

Reading the hours

The VibroCounter permanently displays the sum of the counted hours, an
operation is not provided for reading.
The display is updated every 16 seconds.
8.2

Symbols on the display

The wavy line means that the counter is currently detecting movement
or vibration and is in counting mode.
The h means that the displayed values are hours.
The s lights up in the setting mode when a parameter value is expected in
seconds.
The crossed-out battery icon lights when the batteries are low and
you need to replace them.
© AGRETO electronics GmbH
If the colon is visible as a separator, it is
hours and minutes.
If the comma is visible as a delimiter, it is
decimal with 2 decimal places.
Below the hour display there are various
icons for displaying additional information.
page:10