Programming The Department Text; Programming The Plu Text (Item Label); Programming The Function Text - Sharp ER-A220 Bedienungsanleitung

Programming the department text

You can program a maximum of 16 characters of text for each department. Program the text by entering the
character codes.
Ñ 1
*To program departments 16 through 30, press the department shift key at this point.
Key operation example
070

Programming the PLU text (item label)

You can program a maximum of 16 characters of text (item label) for each PLU or subdepartment. Program the
text by entering the character codes.
Ñ 2
Key operation example
077

Programming the function text

You can program a maximum of 12 characters of text for each function key and other functions using the table
on the following pages. Program the text by entering the character codes.
Ñ 3
* Function no.: See "List of function texts" shown on the following page.
18
To keep the current setting
.
Character code (3 digits)
Up to 16 characters
To program another department
Ñ .
1
º º º
082 085
º º
073 084
¯ É
.
PLU code
Ñ .
2
Ö
1
º º º
069 076
º º
079 078
Ñ É
. *Function no.
(max. 2 digits)
º
Print
To keep the current setting
Ö Character code
(3 digits)
Up to 16 characters
To program the next PLU
To program another PLU
Print
To keep the current setting
≈ Character code
(3 digits)
Up to 12 characters
To program another function text
Dept. key
*
Ó
Text
programmed for
dept. 1
º Ñ
Text
programmed for
PLU code 1
º Ñ
É
É
É