For The Manager; Programming; Setting The Date And Time - Sharp ER-A220 Bedienungsanleitung

FOR THE MANAGER

PROGRAMMING

This chapter illustrates how to program your cash register. Program every item necessary for your store by
following the appropriate procedure.
• You can select the language of texts printed on receipts or journals from English, German, French
or Spanish. For the language selection, please refer to "Language Selection" described later in
this section.
Preparations for Programming
1.
Plug your machine into a standard wall outlet.
2.
Put the manager key in the mode switch and turn it to the PGM position.
3.
Check to see whether paper roll is present in the machine. If it is missing, install a paper roll correctly
referring to the procedure in "4. Installing and removing the paper roll" under "OPERATOR MAINTENANCE".
4.
Program necessary items into your machine.
• On the key operation example shown in the programming details, numeric such as 26082000
indicates the parameter which must be entered using the corresponding numeric keys.

Setting the date and time

1
Setting the date
Enter day (one or two digits), month (two digits), and year (four digits : 1999 to 2098) in this sequence.
Ñ
Key operation example
26082000
Setting the time
Set the time using the 24-hour format. For example, when the time is set to 2:30 AM, enter 230; and when it is
set to 2:30 PM, enter 1430.
Ñ
Key operation example
8
3 ≈
Ñ ≈
3
Ñ É
4 ≈
Ñ ≈
4
Ñ É
1430
Date (seven or eight digits)
Print
Time (max. four digits)
Print
Ñ É
Date
Ñ É
Time