Steam Trigger; Vertical Ironing - Philips PerfectCare Silence GC9500 Serie Bedienungsanleitung

Steam trigger

- Press and hold the steam trigger to start ironing. Keep the
steam trigger constantly pressed when you move the iron
over the fabric.
Steam boost function
- Press the steam boost button to remove stubborn
wrinkles.
For more powerful steam, you can use the turbo steam mode.
1 Press and hold the on/off button for 5 seconds until the
light turns white.
2 The appliance returns to normal steam mode
automatically after 15 minutes to save energy.
3 Otherwise, to switch back to normal steam mode at any
time, press and hold the on/off button for 2 seconds until
the light turns blue again.

Vertical ironing

- Hold the iron in vertical position. Touch the garment lightly
with the soleplate of the iron. Press the steam trigger to
steam the garment and remove wrinkles.
Tip: Pull the garment with one hand to stretch it for more effective
wrinkle removal.
4 When you put down the iron during ironing, put it on the
iron platform or on its heel.
Hot steam is emitted from the iron. Never attempt to remove
wrinkles from a garment while someone is wearing it. Do not
apply steam near your or someone else's body to prevent burns.
Note: The 'iron ready light' flashes from time to time during ironing
to indicate that steam generator is heating up again.
ENGLISH
13