Access The Product - Axis Q3505-V Installationsanleitung

AXIS Q3505–V Fixed Dome Network Camera
2. Slip the grooves in the black shield, over the screws on either side of the camera's optic
holder. Align the screws in the dome cover with the holes in the unit casing and tighten
using the Resitorx key TR20.
3. Remove the protective film from the dome cover.
Camera unit: AXIS Q3505–V

Access the Product

Use the tools provided on the Installation and Management Software CD to assign an IP address,
set the password and access the video stream. This information is also available from the support
pages on www.axis.com/techsup/
Focus & Zoom
If you have selected Optical zoom for installation, follow the instructions below to set focus
and zoom.
To set focus and zoom:
1. Go to Video & Audio > Focus & Zoom.
2. On the Basic tab, set the zoom level using the slider. The buttons < and > move the zoom
position one step in either direction. The buttons << and >> move the zoom position in
multiple steps in either direction.
3. Click Perform auto focus to focus the camera automatically.
4. If more adjustments are needed, go to the Advanced tab.
Note
• Movements in front of the camera should be avoided during automatic focusing.
On the Advanced tab, focus can be adjusted manually:
20