Axis Q3505-V Installationsanleitung Seite 19

AXIS Q3505–V Fixed Dome Network Camera
3. Tighten the 4 tamper proof screws to attach the unit casing to the mounting bracket
using the Resitorx key TR20.
4. Connect the cable to the camera unit.
5. Pull the springs aside in the unit casing and attach camera unit to the unit casing.
Adjust Camera Angle
1.
Lines on optic holder that indicate an increment in the tilt angle by 10°
2.
Small lines on optic mount that indicate a pan increment of 3°
3.
Lines on optic mount that indicate a pan increment of 15°
4.
Lines on lens cover to help ensure camera is level
1. Pan, tilt and rotate the camera to cover the area under surveillance. It is possible to pan
360°, and tilt to an angle of 90°.
2. Pan and rotate the lens to adjust image. Use the 2 lines on the lens cover to ensure
the camera is level. Use the function button to activate levelling aid. See Function
Button on page 14.
Attach Dome Cover
1. Make sure the gasket in the dome cover is clean and sits securely in place.
4
1
19
2
3