Switching The Appliance On; Operating Tips - Bosch GSN Serie Gebrauchsanleitung

en
Controls
Fig. "
1
Temperature display freezer
compartment
The numbers correspond
to the set freezer compartment
temperatures in °C.
2
Display super freezing
Illuminates when super freezing is
on.
3
Alarm display
Lights up if the freezer
compartment becomes too warm.
It goes out when the freezer
compartment has reached the set
temperature.
4
Energy saving mode display
It is lit when the appliance is not
in use.
5
Temperature selection buttons
freezer compartment
These buttons set
the temperature in the freezer
compartment.
6
"Super" button (freezer
compartment)
Switches super freezing
on and off.
7
Alarm button
Used to switch off the warning
signal, see chapter "Alarm
function".
28
Switching
the appliance on
Fig. "
Switch on the appliance with the On/Off
button !/8.
A warning signal sounds.
The temperature display 1 flashes
and the alarm display 3 is lit.
Press the "alarm" button 7. The warning
signal switches off and the temperature
display 1 stops flashing.
Display alarm goes out when
the appliance has reached the set
temperature.

Operating tips

After the appliance has been switched
■
on, it may take several hours until
the set temperature has been
reached. Do not put any food
in the appliance beforehand.
The fully automatic NoFrost system
■
ensures that the freezer compartment
remains free of ice. Defrosting is not
required.
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area
of the door seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until
the resulting low pressure has
equalised.