What If There Are Problems - Beurer HA 85 Pair Gebrauchsanweisung

10. What if there are problems?

Problem
No sound can be
heard from the
hearing amplifier.
The sound is very
weak and faint.
Possible causes
Hearing amplifier is not
switched on.
Battery is not properly connected
to the hearing amplifier.
Battery is empty.
Microphone is dirty.
Hearing amplifier is damaged.
Volume setting on the hearing
amplifier is too low.
Battery is almost empty.
Earplug is dirty.
Solution
Switch on the hearing amplifier as described
in section 7.
Check whether the battery is properly con-
nected to the hearing amplifier.
Replace the battery and charge the empty
battery in the storage box with charging func-
tion as described in section 6.
Clean the microphone opening carefully with
the cleaning brush.
Contact Customer Services.
Increase the volume as described in section 7.
Replace the battery and charge the empty
battery in the storage box with charging func-
tion as described in section 6.
Pull off the earplug and remove coarse im-
purities from the earplug and front end of
the tube with the cleaning brush. Then clean
the earplug under running water.
47