Sunoptic Surgical Titan x350 Gebrauchsanleitung Seite 12

Installed lamp does not match
Lamp has been used more than 1000 hours. Install new SSX0350 lamp or one Lamp has been used more than 1000 hours. Install new
less than 1000 hours.The main screen always displays lamp hours, and notices are
displayed when a lamp is approaching the end of its useful lamp life. This screen is displayed when a lamp is approaching the e
displayed when the lamp has exceeded its usable lifetime. displayed when the lamp has exceed
In the event of a fan problem the unit will turn
Turn off and restart the illuminator. If the fault persists the unit needs servicing Turn off and restart the illuminator. If the fault pe
LIT-218 SUNOPTIC SURGICAL
(English)
Downloaded from www.Manualslib.com
6.2.1.4 INCORRECT WATTAGE LAMP INSTALLED INCORRECT WATTAGE
Install correct SSX0350 lamp. Install correct
match the intended power (watts). Tx350 units require a 3
6.2.1.5 LAMP LAMP HAS EXCEEDED USEABLE LIFE
The main screen always displays lamp hours, and notices are The main screen always displays lamp hours, and notices are
6.2.1.6 FAN FAULT FAN FAULT
fan problem the unit will turn off the lamp and display this screen.
SUNOPTIC SURGICAL
manuals search engine
its useful lamp life. This screen is
rsists the unit needs servicing
® ®
350 units require a 300-watt lamp.
lamp or one used
display this screen.
Rev. A
Date of Revision: 10/04/17 Date of Revision:
Page 12 of 148