WIKA A2G-25 Betriebsanleitung Seite 13

5. Commissioning, operation
1. Instrument fixing at the desired mounting location
(see chapter 5.1 „Instrument mounting")
2. Opening the instrument cover, feeding the connection cable through
the cable gland and connecting the wires to the terminal block (see
chapter 5.2 „Electrical mounting")
WIKA operating instructions model A2G-25
Downloaded from www.Manualslib.com
CAUTION!
Damage to the instrument
When working on open electrical circuits (printed circuit
boards) there is a risk of damaging sensitive electronic
components through electrostatic discharge.
▶
The correct use of grounded working surfaces and
personal armbands is required.
DANGER!
Danger to life caused by electric current
Upon contact with live parts, there is a direct danger to life.
▶
The instrument may only be installed and mounted by
skilled personnel.
▶
Operation using a defective power supply unit (e.g. short
circuit from the mains voltage to the output voltage) can
result in life-threatening voltages at the instrument!
manuals search engine
EN
13