Curling Your Hair - Silvercrest SHC 240 A1 Bedienungsanleitung

Curling your hair

■ 24
Downloaded from www.Manualslib.com
Once you have made all settings on the appliance and the Temperature indicator 7
is permanently on (temperature reached):
1) To prevent the hair from getting caught in the curling chamber 1, use the
hair template 9 to separate the strands of hair . Ensure that the strand is no
thicker than the punched hole in the hair template 9 .
2) When inserting the hair strand into the curling chamber 1, the opening must
be facing towards the head . Hold the appliance around 5 cm from your
scalp . The strand must be straight and taut when it is inserted .
3) Let go of the strand and press the Start button z . The roller 2 starts to turn
and stops automatically after the set number of turns . The strand is wound
around the roller 2 .
As soon as the roller 2 stops, you will hear a beep and the set time starts counting
down . As soon as the programmed time period has elapsed, you will hear three
beeps .
4) Pull the appliance away from your head so that the strand slips out of the
curling chamber 1 .
5) Proceed in the same way with the other strands .
6) When you are finished styling your hair, press and hold down the On/Off
button w until the display goes out .
7) Remove the power plug from the mains power socket .
8) As soon as the appliance has cooled down, put the protective cap 3 onto
the appliance .
│ GB │ IE
manuals search engine
5 cm
SHC 240 A1