Measurements - CONDTROL XP3 Bedienungsanleitung

EN LASER DISTANCE METER

MEASUREMENTS

Single distance measurement
Press
Press
Press
Press
Continuous measurement (tracking)
Press and hold
for 1 sec.
10
Downloaded from www.Manualslib.com
XP3 CONDTROL
Turn on the product.
Turn on laser beam. Aim the product at measured
object.
Take measurement.
– measuring result
Delete the last measuring result.
Activate continuous measurement
function. Laser beam turns on simultaneously.
The product will take measurements one after
another, showing the last measured value. Besides it
will show maximal and minimal measured values.
– maximal value
– minimal value
– difference between maximal and minimal values
– current value
manuals search engine
EN LASER DISTANCE METER
User manual
Press
Addition/Subtraction
Press
Press
Press or
Press
Press
(tracking)
To do addition/subtraction of more than 2 measurements press
and perform the above mentioned operations required number of times.
Press
XP3 CONDTROL
Stop taking measurements. The last measured values
or
are shown on the display.
Turn on laser beam.
Aim the product at measured object.
Take first measurement.
Measuring result appears in the main line.
Activate addition
Turn on laser beam. First measuring result moves to
the line 2 on the display.
Take the second measurement.
– first measurement
– second measurement
– result of addition/subtraction of 2
measurements
Exit the mode.
User manual
/ subtraction .
11