Servicing The Tool; Parts List - Avdel TX2000 Betriebsanleitung

Servicing the Tool

IMPORTANT: The employer is responsible for ensuring that tool maintenance instructions are given
to the appropriate personnel. The operator should not be involved in maintenance or repair of the
tool unless properly trained. The tool must be examined regularly for damage and malfunction.
The following service checks should be performed:
D A I LY
•
Check for oil leaks*.
•
Check that the nose assembly is correct for the fastener to be placed. Please refer to page 7.
W E E K LY
•
Check for oil leaks*.
•
Dismantle and clean the nose assembly with special attention to the jaws using the following procedures:
A N N U A L LY
Please return your tool to your local Avdel
P A R T S L I S T
Part No.
07007-01954
07007-01977
71600-02024
07007-01965
07007-01966
07007-01967
07007-01968
07007-01969
07007-01960
07900-00759
07992-00020
07992-00076
07992-00077
07900-00754
* please refer to page 14 for relevant safety data
Downloaded from www.Manualslib.com
•
Remove the nose equipment using the reverse procedure to the instructions
for changing nose equipment on page 12.
•
Any worn or damaged part should be replaced.
•
Clean and check wear on jaws.
•
Ensure that the jaw spreader is not distorted.
•
Check spring 7 is not distorted.
•
Assemble according to the fitting instructions on page 12.
Description
Battery (Ni-Cd 12V/2.0 Ah)
Battery (Ni-MH 12V/2.2 Ah)
Nose tip spanner
Battery charger: 220/240V~50Hz (UK)
Battery charger: 220/240V~50Hz (Europe)
Battery charger: 220/240V~-50Hz (Australia)
Battery charger: 110V~60Hz (USA/Canada)
Battery charger: 100V~50/60Hz (Japan)
Storage case
Tool Instruction Manual - UK version
Moly-lithium grease
Hyspin ® AWS 15 oil (0.5 litre)
®
Hyspin AWS 15 oil (1 gallon)
Priming pump
manuals search engine
(or every 500,000 cycles, whichever is the soonest)
® authorized distributor or repair centre.
please refer to page 7 for nose tip part numbers
English
13