Herunterladen Inhalt Inhalt Diese Seite drucken

Battery Handling - Avdel TX2000 Betriebsanleitung

Akku-nietgerät
Vorschau ausblenden Andere Handbücher für TX2000:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Before Starting
A summary of the charger LED signals are shown in the table below:
Solid Red LED:
Flashing Red LED:
To achieve the optimum performance from the battery, please adhere to the following guidelines when charging:
Aim to charge when both the battery and charger are cool. Optimum charge capacity is achieved when charging a battery
at 28°C.
A new battery will only reach full capacity after several charges.
To increase the service life of the battery, remove from the charger when the RH LED shows solid yellow.
To increase the service life of the battery, only re-charge when no further fasteners can be placed.
To achieve the maximum number of cycles from a battery use directly after charging.
B A T T E R Y H A N D L I N G & D I S P O S A L
Batteries must only be charged using the Avdel
Only re-charge batteries when cool. Optimum charge capacity is achieved at 28°C.
The battery can be charged up to 1000 times. Optimum life is achieved when used at
22°C. The battery will reach its full capacity only after several charges.
The surrounding temperature must not exceed 50°C (122°F) or be below -40°C (-40°F)
for the battery to operate.
For optimum life and performance only re-charge the battery when no further
fasteners can be placed.
For optimum performance use the battery directly after re-charging.
Significantly reduced operating time of the battery after a complete re-charge
indicates that the battery needs replacing.
Store the battery in a frost free and dry environment.
To ensure that the batteries are disposed of correctly please return to an authorized
recycling centre.
Used batteries must not get into waste, fire or water under any circumstance.
Downloaded from
www.Manualslib.com
1. LEFT LED
Charger Operational
Charger Faulty - Do not use
manuals search engine
2. RIGHT LED
Solid Green LED:
Solid Yellow LED:
Flashing Green LED:
Flashing Red & Green
LED:
Solid Red LED:
Flashing Red LED:
charger supplied.
®
English
Charging In Progress
Battery At Least 90% Charged
Charging Process Complete -
100% Charged
Charging Process Complete -
Ni-MH
Battery Faulty Or Damaged -
Do Not Use
Battery Too Hot Or Cold
9

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für Avdel TX2000

Inhaltsverzeichnis