NORAUTO NS-X800 DBT Handbuch Seite 134

● If the car audio system or the wiring are damaged, do not
use until it has been returned to the manufacturer or the
after-sales service department for repair or replacement�
● Do not modify the wiring yourself and ensure that you
do not inflict any damage. If the wiring does not match
the connections in your vehicle, have any modifications
performed by a qualified technician.
● Before connecting the unit, check that:
● The unit and its components are undamaged� If any damage
is noted, do not use the unit; return it to the vendor for
inspection and repair�
● The voltage indicated on the unit's specification plate
corresponds to your vehicle�
● Do not disassemble the unit yourself� It must only be
disassembled, repaired or inspected by a suitably qualified
person�
● The car audio system must be used only in vehicles with a
12 V DC supply� Do not connect the unit to other systems
(e�g� 6 V DC or 24 V DC)�
● Local laws may restrict the use of this unit while driving and
may sanction any misuse. Always abide by applicable laws
and follow the highway code when using this unit.
● Take care if this unit is used while driving. Do not let yourself
be distracted or disturbed by this unit while driving. Lack of
concentration may cause an accident� Remember that you
are in control of and responsible for the vehicle that you are
driving�
● Do not use the unit in unsafe driving conditions (bad weather,
dangerous roads, dense or difficult traffic, etc.).
● Keep the volume at a suitable level. Excessive volume may
prevent you from hearing noises from your surroundings,
which may result in a risk of accidents.
● Prolonged exposure to high volumes (especially with
headphones) can damage your hearing� Avoid setting the
volume too high or using the unit for too long�
Maintenance
Cleaning the unit: Wipe off the dirt on the panel with a dry
silicon or soft cloth� Failure to observe this precaution may
result in damage to the monitor or unit�
133