Herunterladen Inhalt Inhalt Diese Seite drucken

ItsImagical Aracno-Bot Montageanleitung Seite 17

Inhaltsverzeichnis

Werbung

5
Flush the parts shown below and hand rub the surface. Make sure that there is no
salt residue. Dry all parts separately. (Important: if there is salt residue left on the
magnesium sheet it will shorten the life of the sheet.)
1.Magnesium
6
When the spider starts getting slower or stops, reapply a few drops of salt water
with the applicator into the position as shown below. Do not place drops of salt
water onto the polarity of the connectors, otherwise oxidization may occur. (Import-
ant : If the fabric is totally dry, disassemble the Fuel Cell plate and add salt water as
per figure
2
C. It may take a few minutes to completely wet the fabric.)
2.Nonwoven Fabric
3.Cover
P16
4.Bottom Base

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis