How It Works - ItsImagical Aracno-Bot Montageanleitung

After a period of time the salt water will be exhausted ( about 15 minutes ), the spider will
begin to get slower and stop. Add a few more drops of salt water to start it again
( as in fig 6 )
Each Magnesium sheet can work for 4 hours continuously, then it will become fragmented.
Replace the sheet with a new one to energize the spider. The kit includes 3 refills.
All materials used in this kit are environmentally safe and clean, no toxic substances or
disposal concerns.
Please pay full attention to the below mentioned before use!
1
How to make salt water solution: Add salt to tap water or distilled water at ratio of
1(salt) : 5(water). Any percentage ratio from 20% to 99% salt water is workable
although the 20% will be the most efficient.
Water
2
How to fill the spider with salt water:
a.
Remove Fuel Cell plate

5. How It Works

b.
Cover
Magnesium
Sheet
P10
Remove cover and
magnesium sheet
P14
c.
Nonwoven
Fabric P9
Add salt water on nonwoven fabric