Machine Programming - C.M.A. GLORIA Anwendungen

P
15. rogramming the machine
Turn the programming key to the ON position and follow the in-
structions below:
• Keep the MODE key
access to programming.
• To scroll through the various areas of the programming menu (see
alongside) use the MODE key
• Use the ENTER key
one within the same area.
• To modify the value of each parameter, use the increase
and decrease
With the programming key in the ON position, the selec-
i
tions are not active.
The system automatically exits the programming phase
after about 10 seconds from the last operation carried out.
When programming is finished, turn the programming key
back on OFF.
pressed for at least 3 seconds to have
.
to move from a parameter to the next
keys.
1.0 atm 120°C P
09:16 09-02-04 1
clock set-up
15.1
09:16 18-02-05 1
auto on/off
15.2
on 08:50
auto on/off
15.3
off 18:50
working days
15.4
1 2 3 4 5 6 7
reg. softener
15.5
00000000
boiler pressure
15.6
0.0 atm is=0.0
autosteamer
15.7
65 °C
cup heater
15.8
80°c
language
15.9
English
doser alarm
15.10
000 000 000
cappuccino
15.11
milk > coffee
cappuccino
15.12
yes / no
autosteamer
15.13
yes / no
wash
15.14
min: xxx num: xxx
29