Coffee Selection; Use; Programming - C.M.A. GLORIA Anwendungen

C
8. offee selections

Use

1) Fill the filter with the dose of ground coffee and press it with the coffee press;
2) Attach the filter holder to the dispenser assembly;
3) Place the cup under the filter holder;
4) Select the desired dose, for example, 1 espresso coffee
very to be completed.
i
To interrupt delivery ahead of time, press the STOP key again
again
If the push button panel is locked, use the manual delivery button.

Programming

Always program the left-hand push button panel first and then the others, as follows:
• Turn the programming key to the ON position (
• Fill the filter with the desired dose of ground coffee, press it with the coffee presser and attach the filter holder to the
delivery group;
• Hold the PROG key
• Select the dose to be programmed (e.g. 1 medium coffee
• Wait for delivery to be carried out;
• To confirm the dose press the dose key again (e.g. 1 medium coffee
• Repeat the operation for the other doses and for the other push button panels;
• To exit programming, press the PROG key
tions are made for at least 25 seconds)
• Upon completion turn the programming key to the OFF position;
i
Programming of each dose must be carried out with ground coffee and not with previously used
grounds.
.
down for at least 5 seconds (all LED on the push button panel come on);
(corresponding LED comes on) and wait for deli-
P
flashes on the display);
);
(the machine automatically exits programming if no selec-
or press the selected key
) or the PROG key .
23