Programming Of Cold Milk With Shot Of Coffee; Programming Of Warm Milk With Shot Of Coffee; Selection Count - C.M.A. GLORIA Anwendungen

Programming of COLD MILK WITH SHOT OF COFFEE

• Fill the filter with the desired dose of ground coffee, press it with the coffee presser and attach the filter holder
to the delivery group;
• Select the button for milk with a shot of coffee;
• Wait for cold milk delivery;
• To confirm the dose of cold milk, press the key for milk with a shot of coffee again;
• Wait for warm milk delivery;
• To confirm the dose of warm milk, press the key for milk with a shot of coffee again;
• Wait for a few seconds;
• To confirm the length of the pause, press the button for milk with a shot of coffee again;
• Wait for coffee delivery;
• To confirm the dose of coffee, press the key for milk with a shot of coffee again.
Programming of WARM MILK WITH SHOT OF COFFEE (if provided)
• Fill the filter with the desired dose of ground coffee, press it with the coffee presser and attach the filter holder
to the delivery group;
• Select the button for milk with a shot of coffee;
• Wait for warm milk delivery;
• To confirm the dose of warm milk, press the key for milk with a shot of coffee again;
• Wait for a few seconds;
• To confirm the length of the pause, press the button for milk with a shot of coffee again;
• Wait for coffee delivery;
• To confirm the dose of coffee, press the key for milk with a shot of coffee again.
i
To configure the machine with the WARM MILK WITH A SHOT OF COFFEE selection, contact
technical service.
• To exit programming, press the PROG key
are made for at least 25 seconds)
• Upon completion turn the programming key to the OFF position;
i
The sequence of delivery, be it first milk and then coffee or vice versa, is established in the
machine programming phase (see chapter 15 MACHINE PROGRAMMING)
S
10. election count
To view the sum of work performed by the machine, proceed as follows:
1) Turn the programming key to the OFF position;
2) Keep the PROG key
total number of selections carried out;
2) By pressing the keys on the coffee selection push button panel or on the milk/cappuccino
selections push button panel, it is possible to view the number of selections made with
that key;
4) To exit automatically from selection counting, do not make any selections for
at least 10 seconds.
i
To reset the counts see chap 16 - DATA RESETTING
(the machine automatically exits programming if no selections
pressed for at least 5 seconds until the display shows the
total coffees
000000
counters
000000
25