Tulikivi Senso Bedienungsanleitung Seite 38

Checking the settings
The fuel type menu contains a few preset types of
wood which can be used to optimise the automatic
function. For example, if the wood is of good
quality and dry, use the standard wood type. This
fuel type is suitable for most types of firewood. If,
however, the wood is wet or dense, use the Dense/
heavy wood type. If you use pellets, it is absolutely
necessary to select pellets as the fuel type.
38
Select the suitable
fuel type and save
your selection.
You can see paired
devices in the menu.
In the menu,
you can see
the version
information of
the application,
Bluetooth and
the fireplace
controller.
ABOUT
App version
Bluetooth version
Controller version
In the LED UI menu,
you can adjust the
properties of the LED
display if installed
(accessory). Define
values that suit
you and save your
selections.
Select the room
temperature setting
so that it is on or
off (off by default).
Select the desired
maximum room
temperature and
save your selections.
The controller can be used to monitor the rise of
room temperature during heating. If the room
temperature exceeds the preset maximum value,
the controller will provide a notification when there
is no longer a need to add fuel, even if the fire place
is not fully warm yet. If the temperature continues
to rise, the controller will adjust the air control lever
so that the combustion power of the fire place is
reduced, and the controller will still ask you to
stop heating. The temperature adjustment can be
selected in the application settings to be on or off.
The desired maximum room temperature can also
be selected in the settings. If you wish to maxi mise
the use the fireplace for heating when the room
temperature setting is active, we recommend you
set a high maximum room temperature.