Herunterladen Inhalt Inhalt Diese Seite drucken

Wichtige Hinweise / Important Information; Sicherheitshinweise; Safety Instructions; Das Produkt Richtig Verwenden - Viessmann 5220 Bedienungsanleitung

Steuermodul für licht-vorsignal
Inhaltsverzeichnis

Werbung

DE
1. Wichtige Hinweise
Bitte lesen Sie vor der ersten Anwendung des
Produktes bzw. dessen Einbau diese Bedienungs-
anleitung aufmerksam durch. Bewahren Sie diese
auf, sie ist Teil des Produktes.

1.1 Sicherheitshinweise

Vorsicht:
Verletzungsgefahr!
Für die Montage sind Werkzeuge nötig.
Stromschlaggefahr!
Die Anschlussdrähte niemals in eine Steckdose
einführen! Verwendetes Versorgungsgerät
(Transformator, Netzteil) regelmäßig auf Schä-
den überprüfen. Bei Schäden am Versorgungs-
gerät dieses keinesfalls benutzen!
Alle Anschluss- und Montagearbeiten nur bei
abgeschalteter Betriebsspannung durchführen!
Ausschließlich nach VDE/EN-gefertigte Modell-
bahntransformatoren verwenden!
Stromquellen unbedingt so absichern, dass es
bei einem Kurzschluss nicht zum Kabelbrand
kommen kann.

1.2 Das Produkt richtig verwenden

Dieses Produkt ist bestimmt:
- Zum Einbau in Modelleisenbahnanlagen und
Dioramen.
- Zum Anschluss an einen Modellbahntransforma-
tor (z. B. Art.-Nr. 5200) bzw. an einer Modellbahn-
steuerung mit zugelassener Betriebsspannung.
- Zum Betrieb in trockenen Räumen.
Jeder darüber hinausgehende Gebrauch gilt als
nicht bestimmungsgemäß. Für daraus resultierende
Schäden haftet der Hersteller nicht.
1.3 Packungsinhalt überprüfen
Kontrollieren Sie den Lieferumfang auf
Vollständigkeit:
- Steuermodul für Licht-Vorsignal
(Art.-Nr. 5220)
- 2 Schrauben
- 9 Stecker
- Anleitung
2
Downloaded from
www.Manualslib.com
manuals search engine
EN
1. Important information
Please read this manual completely and attentive-
ly before using the product for the first time. Keep
this manual. It is part of the product.

1.1 Safety instructions

Caution:
Risk of injury!
For installation tools are required.
Electrical hazard!
Never put the connecting wires into a power
socket! Regularly examine the transformer for
damage. In case of any damage, do not use the
transformer.
Make sure that the power supply is switched off
when you mount the device and connect the
cables!
Only use VDE/EN tested special model train
transformers for the power supply!
The power sources must be protected to pre-
vent the risk of burning cables.
1.2 Using the product for its correct purpose
This product is intended:
- For installation in model train layouts and
dioramas.
- For connection to an authorized model train
transformer (e. g. item-No. 5200) or a digital
command station.
- For operation in dry rooms only.
Using the product for any other purpose is not ap-
proved and is considered incorrect. The manufac-
turer is not responsible for any damage resulting
from the improper use of this product.

1.3 Checking the package contents

Check the contents of the package for
completeness:
- Control module for colour light distant signal
(item-No. 5220)
- 2 screws
- 9 plugs
- Manual

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis