Hook-Up - Fagor I-200 R Einbau- Und Betriebsanleitung

EN 1 1 / INSTALLING YOUR APPLIANCE
• •

HOOK-UP

• 220-240 V monophase hook-up
3 3 2 2 - amp fuse.
Blue
Brown
• 400 V 2N triphase hook-up
1 1 6 6
-amp fuse.
Separate the two phase wires (L1 and L2)
before hooking up.
Brown
Blue
For a 400 V 2N triphase hook-up, if your hob
malfunctions, check that the neutral conduc-
tor is properly connected.
Downloaded from www.Manualslib.com
Black or grey
Green/yellow
L L
N N
Black or grey
Green/yellow
L L 2 2
N N L L 1 1
manuals search engine
These hobs must be connected to the power
grid via an electrical outlet that complies with
EIC publication 60083 or an all-pole cut-off
device that complies with installation regula-
tions in effect.
When power is first supplied to your hob, or
after an extended power outage, an indicator
light will appear on the control panel. It auto-
matically disappears after approximately 30
seconds, or as soon as any touch control on
the control panel is pressed. This display is
normal and, if needed, serves as an indication
to the after-sales service staff. In all cases, the
user of the hob should disregard it.
Warning
If the power cable is damaged, it
should be replaced by the manufacturer, its
after-sales service department or by a per-
son with similar qualifications to avoid dan-
ger.
70