Danfoss VLT Advanced Harmonic Filter AHF 005 Projektierungshandbuch Seite 83

Spezifikationen
PE M12 (25Nm)
167.5±1.0 mm [6.6±0.04 in]
9.0±1.0 mm [0.4 ±0.04 in]
Abbildung 7.30 IP20 X8-V3 Interner Lüfter
X3/X4 Capacitor disconnect 120mm (18Nm)
X1 Mains 300mm (50Nm)
Abbildung 7.31 IP20 X8-V3 Interner Lüfter, Klemmenbezeichnung und 3D-Ansicht
M0010801
Projektierungshandbuch
715.0±2.5 mm [28.1±0.10 in]
240.0±1.0 mm [9.4±0.04 in]
300.0±1.0 mm [11.8±0.04 in]
9.0±1.0 mm [0.4 ±0.04 in]
800.0±4.0 mm [31.5±0.16 in]
957.5±4.0 mm [37.7±0.16 in]
A/B Temperature 2.5mm (0.8Nm)
X2 Drive 300mm (50Nm)
Danfoss A/S © 05/2019 Alle Rechte vorbehalten.
420.0±2.5 mm [16.5±0.10 in]
240.0±1.0 mm [9.4±0.04 in]
468.0±2.5 mm [18.4±0.10 in]
8 holes must be used to fix the AHF
with M8 screws
7 7
81