Danfoss VLT Advanced Harmonic Filter AHF 005 Projektierungshandbuch Seite 76

Spezifikationen
PE M8 (15Nm)
7 7
Abbildung 7.16 IP20 X4-V3 Externer Lüfter
X1 Mains 35mm (4Nm)
Abbildung 7.17 IP20 X4-V3 Externer Lüfter, Klemmenbezeichnung und 3D-Ansicht
74
®
VLT Advanced Harmonic Filter AHF 005/AHF 010
157±1.0 mm [6.2±0.04 in]
55.5±1.0 mm [2.2±0.04 in]
9.0±2.5 mm [0.4±0.10 in]
X3/X4 Capacitor disconnect 16mm (3.5Nm)
X2 Drive 35mm (4Nm)
Danfoss A/S © 05/2019 Alle Rechte vorbehalten.
489±2.5 mm [19.3±0.10 in]
157±1.0 mm [6.2±0.04 in]
240±1.0 mm [9.4±0.04 in]
9.0±2.5 mm [0.4±0.10 in]
577±2.5 mm [22.7±0.10 in]
621±2.5 mm [24.4±0.10 in]
621.5±2.5 mm [24.5±0.10 in]
A/B Temperature 2.5mm (0.8Nm)
330±1.0 mm [13±0.04 in]
378±1.0 mm [14.9±0.04 in]
12±1.0 mm [0.5±0.04 in]
8 holes must be used to fix the AHF
with M8 screws
M0010801