Danfoss VLT Advanced Harmonic Filter AHF 005 Projektierungshandbuch Seite 74

Spezifikationen
7 7
Abbildung 7.12 IP20 X3-V3 Externer Lüfter
X1 Mains 16mm (3.5Nm)
Abbildung 7.13 IP20 X3-V3 Externer Lüfter, Klemmenbezeichnung und 3D-Ansicht
72
VLT
PE M8 (15Nm)
57.5±1.0 mm [2.3±0.04 in]
9±1.0 mm [0.4±0.04 in]
X3/X4 Capacitor disconnect 10mm (2.4Nm)
X2 Drive 16mm (3.5Nm)
Danfoss A/S © 05/2019 Alle Rechte vorbehalten.
®
Advanced Harmonic Filter AHF 005/AHF 010
460±2.5 mm [18.1±0.10 in]
145±1.0 mm [5.7±0.04 in] 145±1.0 mm [5.7±0.04 in]
233±1.0 mm [9.2±0.04 in]
9±1.0 mm [0.4±0.04 in]
547±2.5 mm [21.5±0.10 in]
593.5±2.5 mm [23.4±0.10 in]
A/B Temperature 2.5mm (0.8Nm)
330±1.0 mm [13±0.04 in]
378±1.0 mm [14.9±0.04 in]
13±1.0 mm [0.5±0.04 in]
8 holes must be used to fix the AHF
with M8 screws
M0010801