Danfoss VLT Advanced Harmonic Filter AHF 005 Projektierungshandbuch Seite 80

Spezifikationen
PE M8 (15Nm)
7 7
Abbildung 7.24 IP20 X6-V3 Externer Lüfter
X1 Mains 70mm (10Nm)
Abbildung 7.25 IP20 X6-V3 Externer Lüfter, Klemmenbezeichnung und 3D-Ansicht
78
VLT
210.5±1.0 mm [8.3±0.04 in]
90.7±1.0 mm [3.6±0.04 in]
9±1.0 mm [0.4±0.04 in]
X3/X4 Capacitor disconnect 35mm (4Nm)
X2 Drive 70mm (10Nm)
Danfoss A/S © 05/2019 Alle Rechte vorbehalten.
®
Advanced Harmonic Filter AHF 005/AHF 010
579±2.5 mm [23.5±0.10 in]
210.5±1.0 mm [8.3±0.04 in]
240±1.0 mm [9.4±0.04 in]
9±1.0 mm [0.4±0.04 in]
685±2.5 mm [27±0.10 in]
763±2.5 mm [30.1±0.10 in]
764±2.5 mm [30.1±0.10 in]
A/B Temperature 2.5mm (0.8Nm)
370±1.0 mm [14.6±0.04 in]
418±2.5 mm [16.5±0.10 in]
12.5±1.0 mm [0.5±0.04 in]
8 holes must be used to fix the AHF
with M8 screws
M0010801